Programme Préliminaire De La Conférence



Autonomous Vehicle Test & Development Conference


Achieving safe autonomous driving through collaborative test and development, harmonization and standards

Coordination of R&I and pilot activities in Europe: how can we learn in order to scale up?

Stephane Dreher
Senior manager - connectivity and automation, blockchain
Ertico - ITS Europe
Belgium
Many research and innovation, testing and piloting activities are being carried out independently across Europe either through EU-funded consortia projects or at the national level driven by Member States, industry or public-private partnerships. The lack of alignment and common approaches often results in duplications or overlaps, prevents comparability of results and the development of interoperable solutions, and hampers the harmonized deployment of CAD in Europe. In an effort to facilitate the exchange of lessons learned and best practices, as well as the identification of synergies and gaps between projects, the EU-funded ARCADE Coordination and Support Action has set up a comprehensive knowledge base on CAD-related activities in Europe and beyond, which is currently being populated in collaboration with the EU CCAM Single Platform. The project is also organizing concertation events to support consensus-building across stakeholders on methodologies or the identification of next R&I actions on CAD. This presentation will provide an overview of the CAD knowledge base and key outcomes from other harmonization-related activities of the project on methodologies or description of use cases.

Why the safety of autonomous vehicles must be a collaborative affair

Jack Weast
Senior principal engineer, Intel & VP autonomous vehicle standards, Mobileye
Intel Corporation
USA
The AV industry now has a key opportunity to formalize safety standards, give guidance to regulators, and get AVs off the test track and into the real world. For years, Intel and Mobileye have advocated for industry and regulatory consensus on AV safety, culminating in a forthcoming standard – IEEE 2846 – that will establish a model for AV decision making that will be formally and mathematically verifiable, technology-neutral and regionally customizable. This session will provide an overview of the safety standards landscape, how this IEEE standard initiative plays a unique role, and why it is imperative for the industry to adopt a more open, transparent and collaborative approach to deliver on the AV promise.

HEADSTART project: Harmonized European Solutions for the Testing of Automated Road Transport

Álvaro Arrúe
Project manager connected and automated driving
Applus IDIADA
Spain
HEADSTART is an H2020 EU-funded project that aims to define testing and validation procedures of connected and automated driving functions including key technologies such as communications, cybersecurity and positioning. The tests will be in the simulation and real-world fields to validate safety and security performance according to the key users’ needs. The expected impact of the HEADSTART project is based on three main action pillars: testing and validation – potentiation of development strategies bringing time and costs reduction; assessment – creation of assessment protocols increasing vehicle safety awareness; certification – support of regulations ensuring the safe introduction of CAD technologies to the market.

ASAM simulation standards – past, present and future

Benjamin Engel
Global technology manager
ASAM eV
Germany
In 2018 ASAM acquired its first simulation standards in the form of the OpenX portfolio (openDRIVE, openCRG and openSCENARIO), with the addition of the Open Simulation Interface in 2019. Since then, simulation experts worldwide have been working hard on the first official ASAM revisions, the first of which are to be released in Q1 of 2020. This presentation will give an overview of the ASAM activities to date, and provide some insight into where we see the road leading in 2020 and beyond. Our goal is standardization to facilitate the development of safe, regulated autonomous driving.

Humanizing autonomy: setting a global standard for how autonomous systems interact with people

Raunaq Bose
Co-founder and CTO
Humanising Autonomy
UK
By building a human intent prediction software, we are able to increase VRU safety while also improving public acceptance of AVs.

From absolute safety to informed safety: the role of Operational Design Domain

Dr Siddartha Khastgir
Head of verification and validation, intelligent vehicles
WMG, University of Warwick, UK
UK
To prove that automated driving systems (ADS) are safer than human drivers, it is suggested that they need to be driven for over 11 billion miles. A number of miles is not an appropriate metric and doesn’t guarantee absolute safety. This highlights the question: “How safe is safe enough?” To answer, we suggest a departure from the world of absolute safety to informed safety. A key aspect of informed safety includes an accurate and standardized definition of the operational design domain for an ADS, including conveying it to users, regulators and other stakeholders. The first step in all safety standards: ODD definition.

Homologation of automated driving functions: worldwide overview, customer acceptance and strategic aspects

Christian Gnandt
Vice president automated driving
TÜV Süd Auto Service GmbH
Germany
Homologation of automated driving functions presents a huge challenge for their market introduction. Existing regulatory safety frameworks applicable to conventional vehicles and their components are insufficient to fully assess the operational characteristics of current and future automated vehicle technologies. With increasing automation, vehicles transform into cyber-physical systems that no longer require a human driver; therefore, new safety challenges will have to be considered. This presentation discusses those challenges, provides an overview of the current regulatory and standardization work in progress and explains the possibilities for how to approve automated vehicles for public roads today.

Assurance cases for automated driving

Rasmus Adler
Program manager
Fraunhofer IESE
Germany
This presentation covers challenges, solutions and standards for arguing the safety of automated driving. In the V&V Methoden project, Fraunhofer IESE is working on a safety argument that can be based on evidence from testing and simulation. The talk will summarize the current results of this project. It will also discuss UL 4600 and the upcoming application guide of the AK DKE/AK 801.0.8 Spezifikation und Entwurf autonomer/kognitiver Systeme (specification and design of autonomous/cognitive systems).

Simulation, scenarios, verification and validation

Enabling virtual test and validation: creating a virtual proof of validation in the ENVITED ecosystem

Carlo van Driesten
Systems architect for virtual test and validation
BMW Group
Germany
New forms of cooperation are necessary to turn the vision of autonomous driving and fully connected mobility systems into a reality. Virtual validation is an essential part of the development process. Standards for model and system interchange are vital for cross-company and cross-domain virtual integration and simulation of HAD functions. Standards like FMI, SSP and the OpenX at ASAM eV showcase current possibilities, challenges and future directions, as well as a vision of future collaborations. The foundations for the future ecosystem have been laid by the ENVITED ecosystem: standardized data for virtual test and validation; open and modular simulation architecture; traceability of standardized data and test results for a virtual proof of validation.

Validating ADS toward an industrial scenarios database

Marc Pajon
Expert leader - testing and measurement technologies
Renault Group
France
Validating AV safety is a crucial part of ongoing research. The approach of separately track-testing sensors and driving algorithms is hardly sufficient to demonstrate AV safety. Scenario-based simulation approaches are necessary complements to the traditional approach, allowing computation of a controlled diversity of key variables in many iterations in a safe, fast and documented way. French car manufacturers Renault and PSA, together with academic researchers (VEDECOM, SystemX, Lab and Ceesar) and other partners (Valeo, AVS and Expleo), propose to address the challenge of demonstrating AV safety by taking an array of 'in-the-field' situations into account.

Enabling scenario-based verification for autonomous driving

Alexandre Mugnai
Business development manager
Esteco
Italy
Siddhant Gupta
Research engineer, verification and validation, autonomous driving/ADAS
Volvo Cars Corporation
Sweden
This paper proposes a methodology to enable scenario-based verification for autonomous driving by creating a scenario and test database using a suitable design of experiments. Consequently, an optimization strategy is developed to evaluate the criticality of the aforementioned test cases to segregate the test cases to be simulated in a software-in-the-loop (SIL) environment and the critical test cases in the vehicle-in-the-loop (VIL) environment to ensure the coverage using SIL and VIL platforms. The toolchain to create the design of experiments and optimization strategy is the Simulation Platform Active Safety (SPAS) virtual platform enabling SIL verification developed at Volvo Cars, which is co-simulated with the multi-domain optimization tool modeFrontier.

Autonomous vehicle engineering simulation tools for appropriate driver acceptance and comfort

Dr Andras Kemeny
Expert leader immersive simulation
Renault
France
The challenge of autonomous vehicle validation relies on massive simulation, due to the vast number of kilometers to run in various road, traffic and weather conditions. Nevertheless, acceptance of the proposed automation system will have a heavy impact on the use of the system and the efficiency of handling it when sharing or taking back vehicle control. Driver-in-the-loop simulation will play an essential role, using high-performance driving simulators or dedicated configurations, including virtual reality and web-based online solutions. These simulation tools will be essential to complete efficient autonomous vehicle engineering design for driver acceptance and comfort.

Large-scale simulation supporting HARA for ISO 26262, SOTIF and SPTA

Dr Edward Schwalb
Lead data scientist
MSC Software
USA
We will review a Bayesian approach to hazard analysis and risk assessment, which gives rise to ‘smart hazardous miles’. We describe a generic hazard control loop that enables active avoidance of accidents, and illustrate how it can be applied to classify hazards as potential or developing, consistent with the UK theoretical driving test administered to human drivers. This approach further guides our development of tools enabling accelerated development and testing. We discuss the implied hazard specification extensions to the PEGASUS approach. An integrated workflow will be presented, which is consistent with ISO 26262, SOTIF and STPA.

Developing a future-proof scenario database in a world of emergent standards

Mike Freeman
Project engineer
Warwick Manufacturing Group
UK
Testing is fundamental to the safety of automated driving software, but driving billions of miles to achieve sufficient scenario coverage is unfeasible and requires a better approach. Scenario sharing across the industry is gaining support as being the solution. With this aim, the standardization of scenario description is being worked on but we are still some way from a universal standard. This puts the system architect in a difficult position: how to design a scenario database that will support today’s standards as well as those of tomorrow? As part of the UK’s Midlands Future Mobility project, we answer this question.

Panthera driving simulation framework with high-quality content for human-in-the-loop testing

Jelle van Doornik
Product manager ADAS and AD
Cruden
Netherlands
Although the industry seems to be focused on full autonomous driving (L5), Cruden believes that partial automation (L1-L4) is going to be around for decades to come. The increasing number of automated driving functions causes the interaction between driver and vehicle to change. The most time-effective way to test and validate this properly is with an open-architecture simulation framework that allows easy integration of the customer's engineering tools while displaying high-quality content for the human driver. The Panthera driving simulation framework provides a safe and cost-efficient way to add human-in-the-loop simulation to the existing development, test and validation toolchain.

Edge-case hunting in scenario-based virtual validation of AVs

Dr Henning Lategahn
CEO
Atlatec GmbH
Germany
Validating ADAS and AV stacks in large parts in virtual environments using simulators is a given nowadays. The industry largely agrees on a quality over mere quantity view on things. But what is the quality of a scenario set that is tested against? It essentially boils down to the ability to identify edge cases that show the exact limits of the system under test. In this talk, we present how one can use real-world scenarios, translate these into their digital-twin counterparts for simulation and finally modify these to identify the crucial edge cases.

OmniCAV: hybrid simulation for AV stack verification

Dr Gavin Jackman
Managing director
Aimsun
UK
OmniCAV is a consortium project that is partly funded by the UK Government. It aims to deliver a highly realistic simulation environment for AV stack verification that considers all road users and road types. A unique environment that covers all road types and eventualities is being created and validated with real AV testing within the OmniCAV project. Our consortium is applying cutting-edge technology in creating this environment, with high-fidelity lidar mapping, mixed-traffic simulated environments with motorized and non-motorized vehicles (bicycles) and pedestrians, advanced driving simulators and more. The solution will cover the urban environment, the strategic road network and the rural road network, allowing all conditions to be simulated and evaluated. This is being delivered in combination with a UK local government and a Zenzic/CCAV-funded testbed location.

Automated validation toolchain for autonomous driving functions

Thorsten Drogge
System architect
Elektrobit Automotive GmbH
Germany
Handling huge amounts of raw sensor and vehicle bus data in the hundreds of petabyte range, as well as maintaining a precise and comprehensive sensor model tightly coupled to a restbus simulation, poses a major challenge for sufficiently testing and validating automated and autonomous driving functions. Providing a high-performance web portal to ingest, track and reprocess such data in the cloud or from locally attached mass storage of hardware- or software-in-the-loop simulation solutions and driving scene catalogs enables the task of data orchestration to be mastered. In addition, suitable tooling provides hardware support for maintaining a precise sensor model and bus simulation to emulate a full automotive restbus to the device under test.

Generation of safety-critical scenarios for validation of autonomous vehicles

Julien Niol
Research engineer
Apsys
France
Autonomous vehicles are introducing a new challenge to secure them by relying on algorithms to analyze their environment and take decisions accordingly without any human supervision. This paradigm requires the consideration of not only functional safety but also the safety of the intended functionality (SOTIF). We present how we have experimented with a model-based safety assessment methodology to generate classes of safety-critical scenarios for the validation of autonomous vehicles. This approach is based on a high abstraction level behavioral model integrating the system architecture and its immediate environment, developed to address key concepts introduced in ISO 21448.

Managing the test and development process – best practices for accelerating development and achieving safe autonomy

Building a toolchain and an ecosystem – the strategy behind creating a new company for autonomous solutions

Magnus Liljeqvist
Global technology manager - infrastructure
Volvo Autonomous Solutions
Sweden

Scaling a simulation toolchain for higher levels of autonomy

Dr Sandeep Sovani
Global director, automotive industry
Ansys Inc
USA
Driving automation software for ADAS Levels 1-2 is now routinely validated by software-in-the-loop (SIL) simulations. Moving up to Level 3 greatly increases the complexity of the automated driving system, thus increasing validation needs exponentially. This talk presents the ANSYS Autonomy toolchain for virtual validation and sign-off of automated driving features at Levels 3-4. For these levels, beyond SIL simulation the toolchain includes software solutions for scenario collection via drive data analytics, scenario curation, scenario variation, test plan management, robustness testing of perception software, simulation result analytics for coverage analysis and building statistical validation cases, simulation data management and toolchain validation.

Product management for autonomous vehicles

Todd Medema
Product manager
Uber ATG
USA
Most product management resources are focused on B2C or even B2B. But what does it take to design and build internal tooling to accelerate autonomy development? In this talk, we'll cover some of the unique challenges in products built by engineers for engineers, capable of handling immense datasets and complexity, in an unsolved and ever-changing solution set.

Vision, lidar and sensor test and development

Synthetic data utilization for AD/ADAS sensing functions performance evaluation – challenges and opportunities

Farid Kondori
Verification tools lead
Aptiv
Sweden
To tackle the problem of verification and validation of autonomous vehicles, synthetic data generated in virtual environments can be employed to complement field testing, due to the fact that these environments are highly scalable and inexpensive. Although in recent years virtual environments have been employed by the community to develop and test ADAS/AD functionalities, such as AEB or ACC, there has been limited possibility to utilize synthetic data for sensing functions performance evaluation. This presentation will address the challenges and opportunities of virtual environments for test and validation of camera-based sensing algorithms.

Modular solid-state lidar to find the best fit for automotive applications and car integration

Filip Geuens
CEO
XenomatiX – True Solid State Lidar
Belgium
XenomatiX and Marelli have elaborated a modular solid-state lidar approach. Based on compact modules, different lidar systems can be composed to find the right fit between lidar performance, application requirements and vehicle integration restrictions. A number of system configurations will be explained and detection capabilities will be shown. As Level 3 ADAS is the next target for automotive mass-production vehicles, a high-resolution front-view solid-state lidar configuration will be presented.

New consumer-friendly ADAS rating system including innovative lidar solutions

Dr Mircea Gradu
Senior vice president quality and validation
Velodyne Lidar
USA
Rapid developments in the field of driver assistance technologies require clear communication from the industry. Customers need crystal-clear information about what their vehicles can do. Simply naming ADAS functions such as LKA or ACC as a feature is not enough. A clear, general nomenclature is needed to understand and accept new functions. Service descriptions must be refined, and test protocols must be adapted to the use cases. More security through new sensor technologies requires common, transparent standards that must be clearly communicated in order to enable responsible implementation. The presentation gives an overview of identified shortcomings in the current ADAS sensor taxonomy, testing and validation and proposes a standardization approach leading to a new ADAS feature rating system.

LWIR thermal sensing is a must in the autonomous suite

Raz Peleg
Sales director
AdaSky
Israel
The current trio sensing suite of CMOS, radar and lidar fails to address certain corner cases. Adding LWIR thermal sensing to this suite will allow all-weather detection and classification, VRU classification even through fences, VRU classification when only partial body is exposed (between parked vehicles), a solution for blinding situations and faster AV shuttles. The sensor is passive and cost-effective and can support the shift from prototypes to mass autonomous production.

See the unseen: the future of driving

Tim LeBeau
Chief business development officer
Seek Thermal
USA
The best vehicles on the market are hyper-aware and able to detect challenges in their path more quickly than occupants. As autonomous vehicles begin to hit the road, it is imperative that ADAS are optimized to safely avoid hazards with speed and accuracy. The presentation will explore concerns around autonomous vehicles and share the impact of thermal sensors on minimizing human control in driving with real-time insights. It will discuss how data collected from thermal sensors can be leveraged to identify impending dangers before they occur, sharing how temperature values create visual images, accurately distinguishing living from non-living objects.

Physics-based sensor simulation – essential for developing the safest autonomous vehicles

Serge Laverdure
Connected and automated unit director
ESI
France
The certification of autonomous vehicles will require more and more virtual testing as a consequence of a new level of complexity that the automotive industry has never faced before. Nevertheless, real testing should evolve accordingly and should be supported by interoperable software tools. ESI is providing an interoperable solution relying on high-fidelity physics-based sensor models to tackle the harsh weather conditions in which autonomous vehicles will operate in the field (fog, rain, snow, dust and sand). The aim of this presentation is to evaluate the effect of harsh weather conditions on lidar performance.

Real-world and open-road test and development

Robopilot – Level 4 autonomous driving on mixed roads

Nicholas Clay
Head of homologation and quality
Arrival
UK
The presentation will outline the challenges, lessons and successes of Robopilot – a UK CCAV-funded project delivering a demonstration of Level 4 autonomous driving on mixed roads in the UK. It will focus on the testing and validation journey from research and simulation to on-road testing and live demos. Robopilot is a £12m consortium project based in the UK. Partners include UPS, Thales, Bristol Robotics Lab, Loughborough University, TVS and South Gloucestershire Council.

Deploying autonomous buses in mixed traffic

Jorgen Kjaer
Business development manager - autonomous buses
Vy Group
Norway
Vy Group is a leading bus operator in the Nordics, operating over 3,000 buses. We are taking a leading role in the deployment of autonomous buses in public traffic. In a successful project in Kongsberg (Norway), two autonomous buses have replaced a regular diesel bus in operation (mixed traffic). This winter, we will test driving without a safety host on some parts of the route in Kongsberg. We will also test operation without a safety driver in an industry park, with traffic lights. We also have a project for bigger AV buses.

CAV testing on public roads – crucial learning or unnecessary risk?

John Fox
Program director – Midlands Future Mobility
WMG - University of Warwick
UK
Testing of CAVs on public roads is a hot topic. Does it expose the public to unnecessary risk, or is it essential for profound safety improvement on the world’s roads? Can we have the best of both worlds: on-road learning with enhanced safety? The presentation addresses these questions, using the £35m Midlands Future Mobility test and trialling ecosystem as a case study. There are exciting times ahead!

Level 4 AV testing for urban environments: challenges and opportunities

Mohamed Azhar Halikul Zaman
Research engineer
CETRAN
Singapore
As autonomous vehicles (AVs) increase in maturity, the complexity in ensuring they are safe increases as well. The traditional automotive testing methodologies need to evolve to suit the ever-changing nature of AVs. This will bridge the gap between regulators and AV developers, and eventually lead to safe and effective implementation of AVs. In this presentation, CETRAN will present the key challenges it faces when testing Level 4 AVs, and will share its approach and the ongoing research/projects to tackle these challenges. The focus will be on the current unresolved issues in virtual and physical testing.

Practical implications of steward-less autonomous vehicle testing and operation

Tom Jansen
Global domain leader connected and automated vehicles
Ricardo plc
Netherlands
We are seeing the deployment of many 'novel' pilots with self-driving vehicles around the world. Looking more closely, we see that often these vehicles feature a steward or safety driver on board, who is legally in control of the vehicle at all times. With new legislation slowly allowing testing without stewards on board, it is essential that we understand the practical implications for autonomous vehicles operating without safety drivers. In this session we will explain the implications for CAV design and testing from our practical experience working with industry leaders in recent (truly driverless) CAV projects.

Automated driving grows out of the niche

Dr Eric Sax
Head of Institute of Information Processing Technology
Karlsruher Institute of Technology (KIT)
Germany
The motivation for the introduction of autonomous driving differs between road users. For passenger cars, safety and comfort are driving forces. For commercial vehicles, economic reasons are most promising. Increasing the service times of trucks and buses by supporting drivers or even substituting them with advanced driver assistance systems is a huge business case. The idea is to start in areas that are closed to ordinary traffic: on depots. This application domain is followed by bus rapid transport in special lanes, highways and situations that promise a controllable environment. A stepwise approach is most promising and the innovation will be derived from the niche. The idea is to learn and experiment there and, step by step, enhance the field of use.

Data management, storage and cloud technologies

Have we collected enough traffic data?

Sytze Kalisvaart
Project manager StreetWise, integrated vehicle safety department
TNO
Netherlands
Many OEMs and other automated driving companies are collecting massive amounts of driving data to identify what scenarios the automated vehicle might have to deal with. Through scenario extraction, repeated driving patterns are categorized and turned into statistics essential for effective safety assessment. But when is the data collection enough? The TNO StreetWise scenario database includes completeness indicators at various steps in the scenario mining pipeline. We will introduce the meaning and application of these completeness indicators. In this way, OEMs can compare coverage of their data collection and quantify the completeness of the collected data.

The road to cloud-based validation for autonomous vehicles

Janek Jochheim
Product manager cloud and SaaS
dSPACE GmbH
Germany
It is common knowledge in the automotive industry that simulation and software-in-the-loop are key elements for the validation of autonomous vehicles. These simulations will usually be executed in the cloud. But how can a user get to a scalable cloud simulation and – even more importantly – how can they choose and execute the right test cases? And is this 'just' a technical challenge? This presentation discusses the different topics that have to be addressed in order to get to simulation and validation in the cloud, and points out the major challenges on the way.

Introducing data center technologies to simplify data harvesting in test drives

Johannes Zangerle
Technical business developer
b-plus GmbH
Germany
Sensor bandwidths and the complexity of automated vehicle setups are the main challenges for harvesting data during test drives. Measurement tasks are moving toward multi-gigabit data rates with many raw data and metadata streams. Intelligent data distribution and time correlation are crucial for exact data acquisition. In the end, data integrity and time correlation are key for further analysis and AI lessons. This presentation shows how data center technologies such as RDMA over Converged Ethernet and Ethernet switching fulfill the requirements of Level 4 or Level 5 systems, and how an intelligent data recording infrastructure reduces data management complexity.

Mapping, positioning and connectivity

The challenges in testing connected vehicles

Stoyan Nikolov
Test analyst
McLaren Applied Technologies
UK
The complexity of connected and autonomous vehicles increases significantly with the introduction of multiple connectivity channels and sensors. The requirements for robust and uninterruptible connection provoke the need for multiple modems fixed to multiple network operators, being able to switch among various wireless networks (such as 3G, 4G and 5G). The introduction of geofence-triggered software features requires GPS/GNSS connectivity in addition to the mobile network. Testing the connectivity is a challenging task that requires realistic simulation of the mobile network conditions and GPS/GNSS. This presentation will cover the challenges of testing the connectivity channels for connected vehicles, the simulation scenarios to be considered and the challenges of simulating a fleet.

Bridging the gap between AV navigation software and hardware

Greg Drew
CEO
Polysync Technologies
USA
Currently there is a gap between autonomous vehicle (AV) navigation software and physical operation. This presentation will discuss the current status, challenges, pitfalls and best practices for integrating AI and physical navigation systems and ensuring autonomous vehicle safety. The business results of achieving the ability to write once, run anywhere include efficiency, safety, fastest time-to-market, normalization and best-practice optimization. A universal safety standard for integrating software and hardware navigation systems will streamline and normalize the development and optimization of AV navigation systems, accelerate market entry and achieve the promise of AVs to dramatically improve safety.

The collaborative way forward: open data for an autonomous future

Emil Dautovic
Vice president automotive
Mapillary
Sweden
For autonomous vehicles to safely navigate our roads, they need meticulously detailed and accurate information about the world around them. No single actor is capable of collecting all the data necessary for these vehicles to operate in all locations and situations, so the only way forward is to open and share data. This collaborative approach has driven the growth of roughly one billion street-level images on the Mapillary platform – all used to create data sets for training machines to see and understand the world, and to build and maintain the high-definition maps required for autonomous vehicles to be deployed globally.

Pedestrian protection through automated driving

Hartmut Runge
Project manager DriveMark
DLR
Germany
A new concept for an autonomous driving system is presented, which in particular protects other road users such as pedestrians and cyclists. Furthermore, the system automatically ensures compliance with traffic regulations in a smart city equipped with it. It goes far beyond what we have seen so far with lane-keeping or automatic braking systems. The concept of geofencing will be further developed with unprecedented granularity. Detailed maps of the traffic areas of a city with 4in resolution will be used.

On-track testing of connected vehicles: methodology, challenges and results

Annie Saleh
Head of automated and connected driving
PMG Technologies
Canada
PMG Technologies has completed closed-circuit track testing for Transport Canada to evaluate the performance and effectiveness of crash avoidance technologies, specifically connected vehicle technology. Tests were performed using two DSRC-equipped vehicles to reproduce maneuvers that would trigger targeted V2V features (hard braking, slippery road and disabled vehicle). The test results are used to describe and quantify the timing of visual and audible alerts sent to the driver after the reception of basic safety messages. This presentation discusses the testing methodology and challenges of physical testing on tracks. It highlights the analysis of test results and demonstrates the importance of track testing.

Automated public road testing based on digital twins

Patrick Luley
R&D manager - automated driving
Joanneum Research - Digital
Austria
To pave the ground for salable and cost-efficient test and validation of AD functions by real testing on public roads, Joanneum Research is producing Ultra High Definition Maps (UHDmaps) based on mobile mapping data in a salable automated workflow. UHDmaps contain a digital copy of reality, which sets the benchmark for the digital assessment of automated driving functions. The depicted solution is already utilized by the Austrian Light Vehicle Proving Region for Automated Driving (ALP.Lab GmbH) and its partners. The presentation will give an overview of the technical solution and certain test use cases.

Autonomous Vehicle AI, Software and Sensor Fusion Conference


Automotive Grade Linux: Enabling Industry Collaboration through Open Source Software

Dan Cauchy
Executive director, Automotive Grade Linux
The Linux Foundation
USA
The Automotive Grade Linux (AGL) community consists of more than 150 companies across the automotive and tech industries who are working together to develop an open source software platform for all in-vehicle applications from infotainment to autonomous driving. Sharing a single software platform across the industry decreases development times so OEMs and suppliers can focus on rapid innovation and bringing products to market faster. This talk provides an overview of AGL, production use cases including Toyota and Subaru, the project roadmap, and how to get involved.

Bridging ADAS to AD in mass production

Dr Duong-Van Nguyen
ADAS department manager
Panasonic Automotive Europe
Germany
The presentation will discuss the gap between current ADAS and expected ADAS and AD systems. It will also outline technologies to enable 3D sensing using low-cost sensors by available ADAS ECU, and examine advanced sensor fusion to compensate for the deficiencies of one by the abilities of others.

Autonomous driving and open-source technology – does it fit?

Andreas Riexinger
Product manager
Robert Bosch GmbH
Germany
Automated driving solutions introduce a new complexity into the development of embedded systems in cars. This complexity rises with each level of control and autonomy. The toolchain for such challenges is also complex and the integration of all the tools requires considerable effort without a real competitive advantage for the automated driving solution. Instead of solving these challenges alone, wasting lots of money along the way, Bosch's automated driving division has started an open-source community known as OpenADx. This talk will present the open-source approach, the current state of the community and the currently available solutions.

Migrating autonomous software from prototype to production

Robert Day
Director automotive solutions and platforms embedded and automotive division
Arm
USA
This session discusses the challenges in moving autonomous vehicles from prototype to deployment, starting with the general requirements for the compute platform and then looking in more detail at the huge task of migrating the enormous software stack into a commercially deployable platform. The presentation will cover software platforms from an open-source and a commercial perspective, including the use of operating systems and hypervisors, middleware and application stacks. There will also be discussion around functional safety and how mixed-criticality systems can be deployed effectively.

Building an ADAS test and development environment in the cloud

Gabriel Sallah
EMEA HPC and big data architect, autonomous driving platform solutions
Microsoft
United Arab Emirates
This session will focus on the key Azure Cloud services needed to meet the demanding end-to-end requirements of testing and validating autonomous driving vehicles: from large-scale data ingestion (PB), to large-scale simulations (60,000+ cores) using high-performance computing (HPC), to scalable machine learning model creation, deployment and management. The presentation will share real-world experience of successfully building this platform for major OEMs and tier suppliers.

ADAS development and validation workflow and methodology

Dr Florian Baumann
CTO automotive and AI
Dell Technologies
Germany
IT and AI are key components of your development toward autonomous driving and the next generation of ADAS. Using an efficient workflow, you can make your engineers extremely productive and happy. This session will introduce you to the complete workflow of AI-enabled ADAS/AD product development.

Combined model-based and AI architectures for safety and comfortable driving

Dr Son Tong
Senior research engineer
Siemens Digital Industries Software
Belgium
This talk presents our autonomous vehicle (AV) algorithm developments exploiting combination architectures of model-based and artificial intelligence (AI) toward safety and comfortable driving objectives. Recently, AI has been investigated in AV control; however, the disadvantage is a lack of rigorous results on explainability and safety. We discuss several strategies that incorporate data learning in control developments dealing with these challenges while enhancing performance: imitation learning of human-like driving in lane-keeping; Gaussian process control for snowy driving; reinforcement learning control. Finally, our experience in applying AI in robust sensor fusion is also highlighted.

AI and big data management for autonomous driving (AD)

Frank Kraemer
Systems architect
IBM
Germany
Advanced driver assistance systems (ADAS) are already becoming part of all vehicles today, and fully autonomous driving (AD) is in the development phase right now. To win this race, applied artificial intelligence (AI) is the key component. All major OEM and Tier 1 auto manufacturers are implementing and testing AD facilities. Developing and testing AD systems requires the storage and analysis of more data now than ever before. Researchers and developers who can deliver insights faster while managing rapid infrastructure growth will be poised to be industry leaders.

AI-in-the-loop optimization of Ford’s Predictive Dynamic Bending Light

Aleksander Spychala
Software engineer
Ford
Germany
Automotive lighting technologies have a challenging task to offer functionalities that provide a recognizable benefit to drivers. Engineering such technologies is even more difficult. Having successfully implemented artificial intelligence to quantify drivers’ subjective impressions of the performance of Predictive Dynamic Bending Light in real time, as well as in simulations, Ford has employed it for AI-assisted automated feature tuning by conducting AI-in-the-loop tests in addition to driver-in-the-loop tests. Using experimental design and multi-dimensional optimization techniques, various parameter sets are tested and gradually optimized with the aid of genetic algorithms to present a feature calibration offering the best performance determined by the AI.

The future of driving behavior in autonomous vehicles

Davor Andric
CTO AI and analytics North and Central Europe
DXC Technology
Germany
The vision for fully autonomous vehicles has yet to be realized. How realistic is it? Despite the increase in commercially available autonomous features up to SAE Level 3, achieving Level 5 autonomy will require a very different development approach. We will review current approaches and challenges for autonomous driving development, including human driver behavior, and examine what is needed to develop autonomous driving technologies for intelligent and safe real-time driving.

Paving the way for autonomous driving

Massimo Cavazzini
Head of automotive business development - EMEA
Amazon Web Services
Italy
Connected, autonomous, shared and electric vehicle trends are converging to revolutionize the automotive industry. In this unprecedented age of innovation, automotive companies rely on Amazon Web Services (AWS) to fuel their digital transformation efforts and get their products to market more quickly, while retaining ownership and control of their data and brand experience. Learn what challenges autonomous driving is posing for developers, and how the main players in the industry are addressing those challenges.

Establishing trust with in-vehicle software management

Roger Ordman
Executive vice president
Aurora Labs
Israel
Mass-market adoption of new technologies requires trust. Trust that the software underpinning the technology will be safe, secure and will constantly work as advertised. This presentation will look into the challenges faced by the vehicle manufacturers and their Tier 1 suppliers in ensuring that software faults and hacks can be detected before they cause a system failure. The regulatory landscape for cybersecurity and OTA will also be addressed (UNECE WP29 GRVA).

Functional safety and security – partners or independent contributors?

Anamaria Hutuleac
Functional safety software assessor
NXP Semiconductors GmbH
Germany
As the complexity of systems increases, so does the need for functional safety and security. Quite often these goals are meant to be fulfilled by the same component. But how are they analyzed and designed so that instead of being two independent areas, they contribute together toward the achievement of the system goals? The presentation will show the similarities and differences in terms of goals, processes, concepts and mechanisms when it comes to functional safety and security. It will also discuss the analysis that can be done to bring them together on the same page.

UAVs for safety validation and development of highly automated driving

Julian Bock
Manager artificial intelligence
fka GmbH
Germany
Automated driving relies heavily on data-driven methods. Large datasets of real-world measurement data in the form of road user trajectories are crucial for several tasks. Using a drone has the major advantage of recording naturalistic behavior. Due to the ideal viewing angle, an entire scenario can be measured with significantly less occlusion than with sensors at ground level. Both the class and the trajectory of each road user can be extracted from the video recordings with high precision using state-of-the-art deep neural networks. Using this method, we are creating large-scale datasets with naturalistic road user behavior using camera-equipped drones.

End-to-end AI – autonomous vehicle development and V&V

Serkan Arslan
Director of automotive
Nvidia EMEA
Germany

Multi-sensor AI considerations

Mohammad Musa
Founder and CEO
Deepen AI Inc
USA
Accurate classification and segmentation across multiple sensors is required for developing critical ADAS and autonomous vehicle components. Having redundant sensors is important to avoid safety risks in perception, tracking and path/motion planning algorithms. This talk will cover best practices for how to manage and benchmark your AV/ADAS AI models for fused sensor configurations. It will include data validation aspects, early versus late fusion, and data taxonomy implications for your model.

Over-the-air updates for the entire vehicle

Reiner Duwe
Regional manager, EMEA
Real-Time Innovations (RTI)
Germany
Traditional over-the-air updates are known for delivering updates to the system software alone. This presentation will introduce a secure methodology to now also update the functionality of the system hardware controllers. The demo will show how hardware updates can instantaneously be processed in all nodes in today's connected vehicle. The demo will show integrated technologies from the RTI Connext Drive framework, Xilinx adaptable technology and a secure cloud-based system from Bosch Software Innovations.

Tackle the challenges of AD algorithm development with versatile software tools

Nicolas du Lac
CEO
Intempora
France
Software has become an essential milestone for autonomous vehicles; at the same time, the number of software tasks is increasing rapidly with new sensor technologies. Automated driving development is becoming more complex, expensive and time-consuming. It is critical for developers to find reliable, versatile, powerful software tools that enable them to collaborate, face all these challenges by reducing the workload, and handle most automotive use cases from R&D to production. This presentation will focus on software development concepts for automated driving and will show how some OEMs and Tier 1 suppliers succeed, with algorithm demonstrations in multi-threaded and distributed architecture.

Design and implementation of a novel lane-departure detection algorithm

Dr Imran Hayee
Professor
University of Minnesota Duluth
USA
The existing lane-departure detection systems use either some kind of image processing or advanced differential GPS technology. We have designed a novel algorithm that can detect an unintentional lane departure using standard GPS technology without any need for a camera or lane-level resolution maps. We have successfully implemented such an algorithm in a proof-of-concept system and published our results in TRB 2019. Our algorithm success rate is almost 100%. We have filed a US patent application and have secured funding to develop a smartphone app to make this feature widely available to the public.

Real-time trajectory planning for automated driving and some related applications

Dr Joshué Pérez Rastelli
Principal investigator
Tecnalia
Spain
Automated driving has increased the functionalities for a semi, highly, and fully automated vehicles in recent years. Most of the applications receive onboard sensors and communication inputs from the infrastructure and other vehicles. Some motion planning and control techniques have been implemented for complex environments; however, most of them spend a lot of time in the execution. This presentation describes the techniques used by different research teams, their contributions to motion planning and comparison among these techniques. Furthermore, an approach based on a testing methodology for validation of path planning and control algorithms for current and future automated vehicles is presented. A high degree of modularity, adaptability and real-time generation has been considered in the design of the proposed method. It shows good results for real applications in some complex environments.

Lessons learned and mistakes that can be prevented in cybersecurity

Miguel Bañón
Vice president business line cybersecurity
Dekra
Spain
The autonomous vehicle is an exciting technological beast that will disrupt transportation. Other technological advances have had much longer development cycles, from the proper IT building blocks, like operating systems, to space and aviation systems. From the perspective of an IT security evaluation facility, we observe a number of repeating flaws and mistakes that can be prevented, providing a sound basis for lessons that need to be learned and applied for secure take-off and success of the autonomous vehicle.

Protecting mobility: Tesla’s vulnerability can exist in all vehicles

Yonatan Zur
CEO and co-founder
Regulus Cyber
Israel
Researchers from Regulus Cyber recently initiated remote spoofing attacks on the Tesla GNSS (GPS) receiver, exploiting security vulnerabilities in mission-critical telematics, sensor fusion and navigation capabilities. With Tesla as a backdrop, the presentation will explore the security requirements for safe satellite-based navigation for driverless technology – cyber defense for sensors, anti-interference, anti-jamming, anti-spoofing systems that exist, and best practices for implementation. It will also discuss recent technological developments creating new threats, and will highlight the rapid growth of real-world attacks happening across these multiple sectors and how they are expected to grow as GNSS-dependent systems become more connected and autonomous.

Challenges of large-scale sensor data processing for autonomous driving

Dr Jan Wiegelmann
CEO
Autovia GmbH
Germany
During the development and validation of autonomous driving systems, engineers must collect and store a huge amount of sensor data for analysis, deep learning and safety validation. In the presentation, we will show insights from using frameworks for large-scale data processing and distributed applications running in on-premises clusters and in the cloud. We will share our experiences and lessons learned on accelerating the end-to-end engineering process from data ingest and cataloging to analysis, development and safety validation.

Processing sensor data with a hybrid multi-protocol scale-out file system

Stefan Radtke
Technical director systems engineering, EMEA
Qumulo
Germany
Sensor data for autonomous vehicle development is growing exponentially. Large OEMs and suppliers typically have 10s of petabytes stored in their data centers. However, machine learning and other technologies drive demand in compute power that can often not be satisfied within the data centers. Training deep neural networks, for example, requires thousands of compute hours, which can often be better performed in the cloud where bursty workloads can be satisfied with on-demand resources such as GPU optimized servers. During the presentation, we’ll explain how Qumulo addresses these challenges with its multi-protocol file system that works in data centers as well as in the cloud.

Please Note: This conference programme may be subject to change